Zoom

SADT HARTIP 2000 hardness tester

Price: $999.00 $349.00

Product Code: sadt-2000_a
Availability: In Stock
Condition: New

Add to Wish List Add to Compare

(0 reviews) | Write a review

Description Specs Materials Probes Reviews (0)

The SADT Hartip 2000 is an innovative portable Leeb hardness tester and the most accurate available.

NOTE: Rebound type testers are NOT suitable for thin light weight parts like sheet metal, knives, bolts, nuts, washers etc.
Please read these notes that apply to ALL Leeb type testers from any manufacturer.

Device conforms to the Standard ASTM A956-02 & DIN 50156 .

Features:

Universal impact direction mode.
High accuracy: +/- 2HL (0.3% @HL800)
Linear accuracy for any angles
Dual values (Leeb value and one conversion value) can be displayed at the same time.
Big LCD display with back-light
Ten testing materials including forged steel
Tensile strength conversion
RS232 so the tester can be connected a PC to upload and then print the data
Automatic power off

Download the manual by clicking HERE

See specifications. materials and hardness scales for testing, in tabs above.

Technical Parameters

Accuracy	± 2 HL = (± 0.3%)
Scales	HRC, HRB, HB, HV, HSD, MPa
Display	Bright and clear LCD display with back-light
Testing direction	All direction - 360deg
Optional Impact Device	DL, C, D+15, G,
Operating environment	Temperature ：-10～+40℃ Humidity: 20%～85%
Storage environment	Temperature ：-10～+40℃ Humidity:5%～95%
Dimensions	124mm67mm30mm
Weight (g)	240
Std Accessories	Display Unit, Impact Device D, Test Block, Little Support Ring, Cleaning Brush, Operation manual ( online download )
Standard	Conforming to ASTM A956, DIN 50156, GB/T 17394-1998
Power Supply	1.5V AA alkaline battery x 2

IMPACT DEVICE D			HLD: 170-960
Materials	HV	HB	HRC	HRB	HSD	Tensile strength (MPa)
Steel & Cast Steel	80-940	80-647	20.0-67.9	59.6-99.5	32.5-99.5	375-1710
Cold Work Tool Steel	80-898		20.5-67.1			1170-2639
Stainless Steel	85-802	85-655	19.6-62.4	46.5-101.7		740-1725
Cast Iron w/lamellar graphite		93-334
Cast Iron w/nodular graphite		131-387
Cast Aluminum Alloys	80-195	30-159		23-85
Brass		40-173		13.5-95.3
Bronze		60-290		14-100
Copper		45-315		14-100
Forging Steel		142-651
Rolling Steel		140-651

IMPACT DEVICE DL			LDL: 560-950
Materials	HV	HB	HRC	HRB	HSD
Steel	80-950	81-646	20.6-68.2	37.0-99.9	30.6-96.8

IMPACT DEVICE D+15			LD+15: 300-900
Materials	HV	HB	HRC	HRB	HSD
Steel	80-937	80-638	19.3-67.9		33.3-99.3
Cold Work Tool Steel	80-835		19.8-68.2

IMPACT DEVICE G			LG: 300-750
Materials	HV	HB	HRC	HRB	HSD
Steel		90-646		47.7-99.9
GC. Iron		92-326
NC.Iron		127-364

IMPACT DEVICE C			LC: 350-950
Materials	HV	HB	HRC	HRB	HSD
Steel	80-996	80-683	20.0-69.5		31.9-102.3
Cold Work Tool Steel	100-941		20.7-68.2

Optional Impact Devices

Impact device		D	DC	DL	D+15	C	G
Application		For the majority of your hardness testing requirements.	Use in very confined spaces, e.g. in holes, cylinders or for internal measure‐ ments on assembled machines.	For measurements in extremely confined spaces or at the base of grooves.	For measurements in grooves or recessed surface.	Surface hardened components, coatings, thin walled or impact sensitive components (small measuring indentation).	Solid components. E.g. heavy castings and forgings.
Impact energy		11Nmm	11Nmm	11Nmm	11Nmm	3Nmm	90Nmm
Mass of impact body		5.5g	5.5g	7.3g	7.8g	3g	20g
Tip	Diameter	3mm	3mm	3mm	2.78mm	3mm	5mm
	Hardness	1600HV	1600HV	1600HV	1600HV	1600HV	1600HV
	Material	Tungsten carbide	Tungsten carbide	Tungsten carbide	Tungsten carbide	Tungsten carbide	Tungsten carbide
Impact device	Length	147mm	86mm	202mm	162mm	141mm	254mm
	Diameter	20mm	20mm	20mm	20